Building & renovation
Kitchen Renovations
Scope map
Confirm in writing- 1Describe layout, measurements and design.
- 2Describe cabinetry, benchtops and finishes.
- 3Describe demolition, services, installation and handover.
Use this visual as a scope prompt. The guide and each provider's written quote remain the source for the detailed inclusions, exclusions and final price.
Cost factors & scope snapshot
Separate the kitchen build from selections and specialist trades
Quote Guys does not publish an unsupported average for this type of kitchen renovation work. Use one layout, measurement set, appliance schedule and finish brief for every response. Ask who covers demolition, cabinetry, benchtops, plumbing, electrical work, flooring, painting, waste, approvals and final commissioning.
Define the scope for kitchen renovation work first
A useful quote brief for kitchen renovations identifies layout, measurements and design; cabinetry, benchtops and finishes; plus demolition, services, installation and handover. This helps providers decide whether the job fits their service area, credentials and availability.
A clear request helps a provider decide whether the work suits their service area, credentials, equipment and availability before arranging the next step.
- Layout, measurements and design.
- Cabinetry, benchtops and finishes.
- Demolition, services, installation and handover.
Compare the factors behind the written total
Key variables for this work include cabinetry and benchtop specification; plus layout changes and specialist trades. Compare written inclusions, exclusions, timing and total price before choosing a provider.
Ask whether the response is an estimate, a firm quote or an allowance-based proposal. The provider should explain assumptions, payment stages and how any variation will be approved before extra work starts.
- Structural alteration, asbestos, hidden water damage or service upgrades not identified before demolition.
- Appliances, fittings, design, approvals or temporary facilities not expressly listed.
- Flooring, painting, adjoining-room repair and utility work outside the documented kitchen boundary.
Use real job details and qualification questions
The examples below are prompts only. Describe the actual condition at your property and never enter an unsafe area just to gather photos or measurements.
Queensland building-work licensing depends on the exact scope, contract value and exemptions. Confirm the required QBCC class before accepting a quote.
- Replacing cabinets and benchtops in the existing layout: Provide room measurements, appliance models, finishes and items to retain. Ask the contractor to distinguish design, demolition, cabinetry, benchtops, plumbing and electrical disconnection, installation, splashback, painting, waste and temporary kitchen arrangements.
- Moving the sink, cooking appliances or an internal wall: Share available plans and the desired layout without assuming services can move. Request investigation of structure, plumbing, drainage, electrical supply, ventilation, approvals, floor and wall repair and the sequencing of licensed trades.
- A staged renovation with owner-supplied appliances: List each supplied item, delivery date, installation specification and who checks damage or fit. Ask for cabinet and service tolerances, storage, delays, warranty boundaries, rescheduling costs and responsibility for missing parts or incompatible products.
- Who owns design coordination, measurements, selections, approvals and the licensed plumbing and electrical scopes?
- Which cabinetry construction, hardware, benchtop, finishes, appliances, splashback, lighting and making-good are included?
- How are allowances, owner-supplied items, hidden damage, service changes, delays and variations documented and approved?
- Can you show current insurance evidence appropriate to this work and site risk?
- What written warranty, follow-up or rectification terms apply to the quoted scope?
Agree the handover records before work starts
A complete written quote should make the expected handover clear. Ask which records, test results, product details, care instructions and warranty information will be supplied when the agreed work is complete.
Keep those records with the property so a later provider can understand what was installed, repaired, treated or changed without relying on memory.
- Keep final drawings, selections, appliance details, certificates, manuals, warranties and all approved variations.
- Record defects, sealant, cabinetry, benchtop, appliance and licensed-trade warranty dates with care instructions.
Copy this checklist into your job brief.
- 1Describe layout, measurements and design.
- 2Describe cabinetry, benchtops and finishes.
- 3Describe demolition, services, installation and handover.
- 4Check this likely exclusion in writing: structural alteration, asbestos, hidden water damage or service upgrades not identified before demolition.
- 5Check this likely exclusion in writing: appliances, fittings, design, approvals or temporary facilities not expressly listed.
- 6Who owns design coordination, measurements, selections, approvals and the licensed plumbing and electrical scopes?
- 7Which cabinetry construction, hardware, benchtop, finishes, appliances, splashback, lighting and making-good are included?
Planning and maintenance
Know when the next check may be due.
Use the handover pack for cabinet, benchtop, appliance, waterproofing and workmanship warranty dates, and act sooner if leaks, movement, electrical faults or finish defects appear.
HomeCue companion app
Turn the follow-up into a reminder.
In HomeCue, save the completed work and create a reminder for each product, appliance, workmanship or defects review date in the handover pack. Use the provider's written date or condition trigger rather than a generic interval.
HomeCue is being built for a Queensland launch. It is designed to keep property details, maintenance tasks and service history together, with no homeowner paywall.
See what HomeCue will doPractical answers before you compare quotes.
What should the written quote include for kitchen renovations?
Ask for a written scope covering layout, measurements and design; cabinetry, benchtops and finishes; plus demolition, services, installation and handover, plus the total price, timing, exclusions, payment terms and how variations will be approved.
What affects the cost of kitchen renovations in Queensland?
The main variables are cabinetry and benchtop specification; plus layout changes and specialist trades. Photos and measurements can help with an initial response, but some jobs need an on-site assessment before a firm quote is possible.
What handover records should I ask for at the end of kitchen renovation work?
Agree the handover before work starts. Keep final drawings, selections, appliance details, certificates, manuals, warranties and all approved variations. Record defects, sealant, cabinetry, benchtop, appliance and licensed-trade warranty dates with care instructions. Ask for any additional completion, care or warranty information that applies.
How should I compare written quotes for kitchen renovation work?
Give each provider one brief that identifies layout, measurements and design; cabinetry, benchtops and finishes; plus demolition, services, installation and handover. Compare the same inclusions, exclusions, assumptions, timing, payment terms and handover records before choosing.
Can I request free quotes for kitchen renovation work through Quote Guys?
Yes. Queensland homeowners can make one private request for free. It may be accepted by up to three suitable tradies, depending on the job, location and availability, with no obligation to hire.
Request up to 3 free quotes for this job.
Make one private Queensland request. Matching depends on the service, location and current tradie availability, and there is no obligation to hire.