Interior trades
Tiling
Scope map
Confirm in writing- 1Describe measured areas and tile selection.
- 2Describe substrate preparation and layout.
- 3Describe adhesive, grout, trims and clean-up.
Use this visual as a scope prompt. The guide and each provider's written quote remain the source for the detailed inclusions, exclusions and final price.
Cost factors & scope snapshot
Separate substrate work from the tiling finish
Quote Guys does not publish an unsupported average for this type of tiling work. Supply measured areas, tile details, layout preference and the known substrate condition. The quote should distinguish removal, preparation, waterproofing, laying pattern, trims, grout, sealant, waste and make-good work.
Define the scope for tiling work first
A useful quote brief for tiling identifies measured areas and tile selection; substrate preparation and layout; plus adhesive, grout, trims and clean-up. This helps providers decide whether the job fits their service area, credentials and availability.
A clear request helps a provider decide whether the work suits their service area, credentials, equipment and availability before arranging the next step.
- Measured areas and tile selection.
- Substrate preparation and layout.
- Adhesive, grout, trims and clean-up.
Compare the factors behind the written total
Key variables for this work include area, tile format and pattern; plus substrate repairs, waterproofing and access. Compare written inclusions, exclusions, timing and total price before choosing a provider.
Ask whether the response is an estimate, a firm quote or an allowance-based proposal. The provider should explain assumptions, payment stages and how any variation will be approved before extra work starts.
- Structural, moisture, waterproofing or substrate rectification beyond the preparation allowance.
- Plumbing fixture removal, electrical work, cabinetry and painting unless expressly coordinated.
- Additional tiles, pattern wastage or replacement of discontinued matching material outside the agreed allowance.
Use real job details and qualification questions
The examples below are prompts only. Describe the actual condition at your property and never enter an unsafe area just to gather photos or measurements.
Queensland building-work licensing depends on the exact scope, contract value and exemptions. Confirm the required QBCC class before accepting a quote.
- Retiling a bathroom floor and shower walls: Provide dimensions, tile selection, substrate information and the status of plumbing and waterproofing. Ask the tiler to separate demolition, substrate preparation, falls, waterproofing interfaces, set-out, trims, grout, sealant, curing, waste and certificates handled by other trades.
- Replacing cracked tiles in an otherwise finished area: Share photos, spare tile availability and whether cracking is isolated or recurring. Request investigation of the substrate or movement joint, a clear limit on matching and breakage risk, adhesive and grout selection and the boundary between repair and full replacement.
- Laying large-format tiles through an open living area: State tile size, floor area, transitions, existing level and furniture or access constraints. Ask for substrate flatness checks, levelling allowances, movement joints, lippage expectations, set-out, cutting, protection and when the floor can be used.
- Who checks the substrate, falls, movement joints and waterproofing interface before tiling begins, and how are defects documented?
- Which tile, pattern, grout joint, adhesive, grout, trim and sealant specifications are included?
- How will tile variation, wastage, matching, levelling, extra preparation and hidden damage be approved and priced?
- Can you show current insurance evidence appropriate to this work and site risk?
- What written warranty, follow-up or rectification terms apply to the quoted scope?
Agree the handover records before work starts
A complete written quote should make the expected handover clear. Ask which records, test results, product details, care instructions and warranty information will be supplied when the agreed work is complete.
Keep those records with the property so a later provider can understand what was installed, repaired, treated or changed without relying on memory.
- Keep tile and grout specifications, batch details, care instructions, spare material and any waterproofing or compliance records.
- Record curing restrictions, sealer requirements, workmanship warranty and the trigger for reviewing grout, sealant or movement.
Copy this checklist into your job brief.
- 1Describe measured areas and tile selection.
- 2Describe substrate preparation and layout.
- 3Describe adhesive, grout, trims and clean-up.
- 4Check this likely exclusion in writing: structural, moisture, waterproofing or substrate rectification beyond the preparation allowance.
- 5Check this likely exclusion in writing: plumbing fixture removal, electrical work, cabinetry and painting unless expressly coordinated.
- 6Who checks the substrate, falls, movement joints and waterproofing interface before tiling begins, and how are defects documented?
- 7Which tile, pattern, grout joint, adhesive, grout, trim and sealant specifications are included?
Planning and maintenance
Know when the next check may be due.
Follow the installer instructions for curing, cleaning and any sealer used, and review sooner if grout, sealant, tiles or the substrate crack, loosen, stain or show moisture.
HomeCue companion app
Turn the follow-up into a reminder.
In HomeCue, save the completed work and create a reminder for the product or workmanship warranty date and any installer-specified sealer or condition review. Use the provider's written date or condition trigger rather than a generic interval.
HomeCue is being built for a Queensland launch. It is designed to keep property details, maintenance tasks and service history together, with no homeowner paywall.
See what HomeCue will doPractical answers before you compare quotes.
What should the written quote include for tiling?
Ask for a written scope covering measured areas and tile selection; substrate preparation and layout; plus adhesive, grout, trims and clean-up, plus the total price, timing, exclusions, payment terms and how variations will be approved.
What affects the cost of tiling in Queensland?
The main variables are area, tile format and pattern; plus substrate repairs, waterproofing and access. Photos and measurements can help with an initial response, but some jobs need an on-site assessment before a firm quote is possible.
What handover records should I ask for at the end of tiling work?
Agree the handover before work starts. Keep tile and grout specifications, batch details, care instructions, spare material and any waterproofing or compliance records. Record curing restrictions, sealer requirements, workmanship warranty and the trigger for reviewing grout, sealant or movement. Ask for any additional completion, care or warranty information that applies.
How should I compare written quotes for tiling work?
Give each provider one brief that identifies measured areas and tile selection; substrate preparation and layout; plus adhesive, grout, trims and clean-up. Compare the same inclusions, exclusions, assumptions, timing, payment terms and handover records before choosing.
Can I request free quotes for tiling work through Quote Guys?
Yes. Queensland homeowners can make one private request for free. It may be accepted by up to three suitable tradies, depending on the job, location and availability, with no obligation to hire.
Request up to 3 free quotes for this job.
Make one private Queensland request. Matching depends on the service, location and current tradie availability, and there is no obligation to hire.